Choose a project and set its constraints

3D Perler Bead Panels — Numbered Flat-Panel Planner

Calculate five nominal bead panels, inspect numbered 29×29 sections and bead counts, then download printable charts and a preparation checklist. Physical assembly is not yet validated.

Numbered flat bead panels

Flat geometry only. The inset is a planning allowance, not measured fused thickness. No interlocking tabs or validated assembly joints are generated. No real assembly sample or load test has been recorded.

Outer width (cells)

Outer depth (cells)

Wall height (cells)

Nominal inset (cells)

Bead pitch (mm)

Reference color

Total beads: 1956 · 29×29 board sections: 8

1 Base · 30×22

Nominal dimensions: 150×110 mm · Total beads: 660

Cell coordinates: x 1–29, y 1–22

Nominal dimensions · Nominal inset (cells): 1

1 Base

30×22 · Total beads: 660 · 29×29 board sections: 2

2 Front

32×12 · Total beads: 384 · 29×29 board sections: 2

3 Back

32×12 · Total beads: 384 · 29×29 board sections: 2

4 Left

22×12 · Total beads: 264 · 29×29 board sections: 1

5 Right

22×12 · Total beads: 264 · 29×29 board sections: 1

My preparation checklist

Your checks record preparation only; they never certify assembly or strength. Charts are schematic, not life-size templates.